Maszn: Created page with "The next step is to engage the main switch (`Shift + M` keys) and release the brakes. To do this, set the combined brake valve to the release position (`Num.` key) and wait until the pressure in the brake pipe reaches 0,5 MPa and the brake cylinders are emptied. These actions should be monitored on the pressure gauges located on the right side of the panel."

2025-08-12T08:04:41Z

Created page with "The next step is to engage the main switch (<code>Shift + M</code> keys) and release the brakes. To do this, set the combined brake valve to the release position (<code>Num.</code> key) and wait until the pressure in the brake pipe reaches 0,5 MPa and the brake cylinders are emptied. These actions should be monitored on the pressure gauges located on the right side of the panel."

New page

The next step is to engage the main switch (<code>Shift + M</code> keys) and release the brakes. To do this, set the combined brake valve to the release position (<code>Num.</code> key) and wait until the pressure in the brake pipe reaches 0,5 MPa and the brake cylinders are emptied. These actions should be monitored on the pressure gauges located on the right side of the panel.

Translations:Tabor/Obsługa/Obsługa i sterowanie EP09/254/en - Revision history